Двигатель и топливная система |
Модель двигателя | Cat? C7.1 ACERT?
| Объем двигателя | 7.1L
| Объем поддона картера двигателя | 20.1L
| Топливный бак | 500.1L
| Уровень выбросов | Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA
|
---|
|
Трансмиссия |
Transmission | 50L
| Тип трансмиссии | Cat Planetary Power Shift
| Forward - 1 | 5.8 км/ч
| Forward - 2 | 10.2 км/ч
| Forward - 3 | 17.8 км/ч
| Forward - 4 | 30.6 км/ч
| Reverse - 1 | 6.6 км/ч
| Reverse - 2 | 11.6 км/ч
| Reverse - 3 | 20.2 км/ч
| Reverse - 4 | 34.7 км/ч
|
---|
|
Габариты и масса |
Эксплуатационная масса | 21949.4kg
|
---|
|
Гидравлическая система |
|
Ходовая часть |
Front Tires | Planetary – Fixed
| Rear Tires | Planetary Oscillating
| Дорожный просвет | 0.43m
| Ground Clearance - Bumper | 0.71m
| Brakes | Single Disc Wet (enclosed) 4 WHL
|
---|
|
Технические характеристики |
Ground To Top Of Beacon | 4m
| Ground To Top Of Hood | 2.63m
| Height - Top Of Cab | 3.69m
| Length To Front Tire | 6.38m
| Wheel Base | 3.36m
| Полезная мощность | 185kw
| Oscillation Angle | 10 °
| Diesel Exhaust Fluid Tank | 15.9L
| Ac Oil | 0.2L
| Oil Renewal System (Ors) | N/A
| Lift/Tilt System - Circuit | Pilot operated LS valve with EH
| Pilot System | Open center, fixed displacement gear
| Lift/Tilt System | Variable displacement piston
| Pilot Relief Valve Setting | 3046 psi
| Steering System - Circuit | Pilot, Load Sensing
| Steering System - Pump | Variable displacement piston
| Relief Valve Setting - Steering | 4003 psi
| Steering Cycle Times - Low Idle | 8.2 s
| Maximum Flow At 2,200 Rpm | 38.8 гал/мин
| Rated Speed | 2200rpm
| Peak Power Speed | 2200rpm
| Bore | 104.2mm
| Stroke | 134.7mm
| Peak Torque - 1,400 Rpm | 1015.6Nm
| Torque Rise | 26%
| Operator Sound Level - Iso 6396 | 70 dB(A)
| Note (1) | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
| Note (2) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
| Note (3) | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
|
---|
|