Ratio | 32.62:1
|
Control | AC Torque Control System
|
Motorised Wheels | GDY106 Induction Traction Motors
|
Maximum Speed (Km/H) | 64.5
|
Lighting | 24 volt
|
Cranking Motors | Two/24 volt
|
Объем до краёв | 171m3
|
Heaped (2:1, Sae) | 211m3
|
Payload | 290448kg
|
Structure | Flat floor configuration
|
Canopy Sheet | 5 mm 0.19'' 690 mPa 100,000 psi tensile strength steel
|
Front Sheet | 9 mm 0.35'' 1379 mPa 200,000 psi tensile strength steel
|
Side Sheet | 8 mm 0.31'' 1379 mPa 200,000 psi tensile strength stee
|
Floor Sheet | 16 mm 0.63'' 1379 mPa 200,000 psi tensile strength steel (two-piece)
|
Loading Height | 7.1m
|
Horse Power: Sae J1995 | 2611kw
|
Operating Cycle | 4-cycle
|
Service Brake Type | Oil-cooled, hydraulic-actuated, multiple disc brakes at each wheel.
|
Parking Brake Type | Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on ±15% grade at maximum gross vehicle weight.
|
Wheel Brake Locks | Switch-activated
|
Electric Dynamic Retarder (Max.) | 4026
|
Cooling System | 719L
|
Crankcase | 341L
|
Hoist Cylinder | Two 3-stage dual-acting outbound cylinders and internal cushion valve, over-centre damping
|
Relief Pressure | Hoist and brake cooling- 17237 kPa 2,500 psi Steering and brake-25759 kPa 4,000 psi
|
Hoist Time | Power-up loaded: 21 sec, Power-down: 23 sec, Float-down empty:24 sec
|
Turning Circle Diameter (Sae) | 29.8m
|
Reservoir | 946.4L
|
Filtration | In-line replaceable elements
|
Suction | Single, full flow, 100 mesh
|
Hoist And Steering | Dual, in-line, high pressure
|
Pumps | .Two pumps, single package, end of alternator
|
---|