| Ratio | 32.62:1
|
|---|
| Control | AC Torque Control System
|
|---|
| Motorised Wheels | GDY108 Induction Traction Motors
|
|---|
| Maximum Speed (Km/H) | 64.5
|
|---|
| Lighting | 24 volt
|
|---|
| Cranking Motors | Two/24 volt
|
|---|
| Объем до краёв | 149m3
|
|---|
| Heaped (2:1, Sae) | 214m3
|
|---|
| Payload | 40823kg
|
|---|
| Structure | Flat floor configuration
|
|---|
| Canopy Sheet | 06mm 0.24' 690 Mpa 1,00,000 psi tensile strength steel
|
|---|
| Front Sheet | 10 mm 0.39' Outer, 12mm 0.47' Center, 1379 mPa 200,000 psi tensile strength steel
|
|---|
| Side Sheet | 10 mm 0.39' 1379 Mpa 2,00,000 psi tensile strength steel
|
|---|
| Floor Sheet | 16 mm 0.63' Outer, 19mm 0.75' Center, 1379 mPa 200,000 psi tensile strength steel
|
|---|
| Loading Height | 7.2m
|
|---|
| Horse Power: Sae J1995 | 2610kw
|
|---|
| Operating Cycle | 4-cycle
|
|---|
| Service Brake Type | Oil-cooled, hydraulic-actuated, multiple disc brakes at each wheel.
|
|---|
| Parking Brake Type | Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on ±15% grade at maximum gross vehicle weight.
|
|---|
| Wheel Brake Locks | Switch-activated
|
|---|
| Electric Dynamic Retarder (Max.) | 4476
|
|---|
| Cooling System | 719L
|
|---|
| Crankcase | 341L
|
|---|
| Hoist Cylinder | Two 3-stage dual-acting outbound cylinders and internal cushion valve, over-centre damping
|
|---|
| Relief Pressure | Hoist and brake cooling- 17237 kPa 2,500 psi Steering and brake-20685 kPa 3,000 psi
|
|---|
| Hoist Time | Power-up loaded: 24 sec, Power-down: 14 sec, Float-down empty:24 sec
|
|---|
| Turning Circle Diameter (Sae) | 32.1m
|
|---|
| Reservoir | 946.4L
|
|---|
| Filtration | In-line replaceable elements
|
|---|
| Suction | Single, full flow, 100 mesh
|
|---|
| Hoist And Steering | Dual, in-line, high pressure
|
|---|
| Pumps | .Two pumps, single package, end of alternator
|
|---|
|
