| Blade Base | 2570mm
|
|---|
| Front Canopy Height | 4.12m
|
|---|
| Height To Top Of Isomount Cab | 3180mm
|
|---|
| Inside Body Depth - Maximum | 1.41m
|
|---|
| Inside Body Length | 5.64m
|
|---|
| Inside Body Width | 3.63m
|
|---|
| Loading Height - Empty | 3.14m
|
|---|
| Operating Width | 4785.36mm
|
|---|
| Outside Body Width | 3.94m
|
|---|
| Overall Body Length | 8.17m
|
|---|
| Overall Height - Body Raised | 8.27m
|
|---|
| Overall Tire Width | 3.69m
|
|---|
| Rear Axle - Tail | 2.6m
|
|---|
| Wheel Base | 3.97m
|
|---|
| Centerline Front Tire Width | 3.11m
|
|---|
| Bore | 137.2mm
|
|---|
| Stroke | 170.2mm
|
|---|
| Gross Power - Sae J1995 | 384.1kw
|
|---|
| Net Torque - Sae J1349 | 2486.6Nm
|
|---|
| Note (3) | No engine derating required up to 3000 m (9,843 ft) altitude.
|
|---|
| Note (4) | Meets U.S. Environmental Protection Agency Tier 4 and EuropeanUnion Stage IV emission standards.
|
|---|
| Объём охлаждающей жидкости | 51L
|
|---|
| Circle Gearbox Fluid Capacity | 5.7L
|
|---|
| Number Of Gears - Forward | 8
|
|---|
| Number Of Gears - Reverse | 8
|
|---|
| Steering Standards | ISO 5010:2007
|
|---|
| Steer Angle | 40.5°
|
|---|
| Turning Diameter - Front | 17.6m
|
|---|
| Wheel Lean | 20°
|
|---|
| Oscillation - Total | 32°
|
|---|
| Moldboard Thickness | 22mm
|
|---|
| Relief Valve Pressure | 18961kPa
|
|---|
| Diameter | 1524mm
|
|---|
| Rotation | 360°
|
|---|
| Shift Left | 787mm
|
|---|
| Shift Right | 787mm
|
|---|
| Brake Surface - Front | 0.2m2
|
|---|
| Brake Surface - Rear | 4.1m2
|
|---|
| Brake Standards | ISO 3450:1996
|
|---|
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb).
|
|---|
| Relief Valve Setting - Raise | 2750 psi
|
|---|
| Body Raise Time - High Idle | 7.5 s
|
|---|
| Body Lower Time - Float | 10 s
|
|---|
| Body Power Down - High Idle | 10 s
|
|---|
| Relief Valve Setting - Lower | 500 psi
|
|---|
| Planetary Ratio | 4.80:1
|
|---|
| Differential Ratio | 1.92:1
|
|---|
| Total Reduction Ratio | 9.26:1
|
|---|
| Nominal Payload Class (100%) | 38192.5kg
|
|---|
| Top Speed - Loaded | 73.8 км/ч
|
|---|
| Body Capacity - Sae 2:1 | 25.2m3
|
|---|
| Target Payload Capacity | 38192.5kg
|
|---|
| Maximum Payload Class (110%) | 42002.7kg
|
|---|
| Not To Exceed Payload (120%)* | 45812.8kg
|
|---|
| Cooling System | 125L
|
|---|
| Differential - Final Drives | 178L
|
|---|
| Steering Tank | 54.9L
|
|---|
| Crankcase | 64.4L
|
|---|
| Brake Hoist System | 227.2L
|
|---|
| Def Tank | 22.8L
|
|---|
| Передняя ось в ненагруженном состоянии | 49 %
|
|---|
| Front Axle - Loaded | 34 %
|
|---|
| Задняя ось в ненагруженном состоянии | 51 %
|
|---|
| Rear Axle - Loaded | 66 %
|
|---|
| Note (1) | Chassis weight with 100% fuel, hoist, body mounting group, rimsand tires.
|
|---|
| Note (2) | Body weight is the standard dual slope body with no liner and will vary depending on configuration.
|
|---|
| Struck | 17.6m3
|
|---|
| Heaped (2:1, Sae) | 25.2m3
|
|---|
| Rops Standards | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
|
|---|
| Fops Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.
|
|---|
| Sound Standards (3) | Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used.
|
|---|
| Sound Standards (1) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
|
|---|
| Sound Standards (2) | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A).
|
|---|
| Rear Axle Oscillation | 8.9°
|
|---|
