Двигатель и топливная система |
Марка двигателя | John Deere PowerTech PWL (B20 Diesel Compatible)
| Объем двигателя | 4.50 L
| Система наддува двигателя | Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage – air-to-air aftercooling and cooled exhaust gas recirculation
| Число цилиндров двигателя | 4
| Номинальная частота вращения двигателя | 96 @ 2100 kW 130 @ 2100 hp
| Fuel Tank Capacity | 205L
|
---|
|
Трансмиссия |
Final Drive Type | Inboard planetary three pinion
|
---|
|
Вал отбора мощности (ВОМ) |
Pto Actuation | Electrohydraulic
| Rated Pto Power | 76 @ 2100 kW 102 @ 2100 hp
|
---|
|
Гидравлическая система |
Hydraulic Type | Pressure Compensated (PC) System with Load Sensing Function – Base Pressure & Flow Compensated (PFC) System with Load Sensing Function – Option
| Pump Rated Output | Standard 80 Advertised – Base (PC) л/мин 21.1 Advertised – Base (PC) gpmOptional 114 Advertised – Option (PFC) л/мин 30 Advertised – Option (PFC) gpm
|
---|
|
Ходовая часть |
Front Axle Clearance - Mfwd | 607mm
| Turning Radius With Brakes | 7.1 m 23.5 ft
| Turning Radius Without Brakes | 7.1m
| Wheelbase - 2wd | 2580mm
| Wheelbase - Mfwd | 2580mm
| Tires / MFWD | Front 380/85R28 133A8 R1W Radial in.Rear 460/85R38 149A8 R1W Radial in.
| Tires / 2WD | 10.00-16 10PR F2 Bias – Front in. 460/85R38 149A8 R1W Radial – Rear in.
| Front Tread Range | 2WD – 1534 to 2042 mm 60.4 to 80.4 in., MFWD – 1494 to 2206 mm 58.8 to 86.8 in.
| Brakes, Type And Control | Hydraulic wet disk
| Standard Tires | Independent 1-3/8 in., 540/1000 reversible shaft
|
---|
|
Технические характеристики |
Limited Slip Differential | Yes
| Cylinder Liners | Wet sleeve
| Underhood Muffler | Yes
| Optional | Independent 540 rpm
| Clutch, Wet/Dry | Wet
| Creeper | Yes
| Reverser | Left-hand base
| Maximum Operating Pressure | 20000kPa
| Sensing Type | Electronic lower link
| Joystick Scv Control | Mechanical and Electronic
| Differential Controls | Electrohydraulic
| Availability | Front YesFront & Rear Yes
| Axle Type | Flanged axle, 8 position adjustable steel wheels – Base, Options: Flanged axle, 2 position fixed steel wheels 79.45 x 2555 with 2-Position Fixed Cast Wheels mm 3.1 x 100.6 with 2-Position Fixed Cast
|
---|
|