Двигатель и топливная система |
Модель двигателя | Cat C13 ACERT
| Объем двигателя | 12.6L
| Топливный бак | 425.9L
| Уровень выбросов | Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards.
| Net Power - Iso 9249 | 296.8kw
|
---|
|
Трансмиссия |
Transmission | 76.9L
| Forward - 1 | 6.3 км/ч
| Forward - 2 | 12 км/ч
| Forward - 3 | 21.1 км/ч
| Forward - 4 | 37.5 км/ч
| Reverse - 1 | 7 км/ч
| Reverse - 2 | 13.7 км/ч
| Reverse - 3 | 24.2 км/ч
| Reverse - 4 | 39.5 км/ч
|
---|
|
Габариты и масса |
Высота с рамой безопасности ROPS | 3.81m
| Максимальная ширина по шинам | 3.51m
| Эксплуатационная масса | 35562.6kg
|
---|
|
Гидравлическая система |
Hydraulic Cycle Time - Total | 10.1 s
| Hydraulic Tank | 181.7L
|
---|
|
Ходовая часть |
Front Tires | Fixed
| Rear Tires | Oscillating ?13 °
| Дорожный просвет | 0.41m
| Brakes | Brakes meet ISO 3450:2011 standards
|
---|
|
Технические характеристики |
Height - Top Of Exhaust Pipe | 3.74m
| Height - Top Of Hood | 3.1m
| Hinge Pin Height At Carry | 0.82m
| Overall Length - Without Bucket | 8.59m
| Rack Back - Carry Height | 48 °
| Rack Back - Maximum Lift | 57 °
| Rack Back At Ground | 42 °
| Tread Width | 2.54m
| Wheel Base | 3.81m
| Maximum Net Torque - 1,100 Rpm | 2058.2Nm
| Maximum Net Torque - 1,000 Rpm | 2040.6Nm
| Bucket Capacities | 4.6-12.0 m (6.0-15.75 yd)
| Implement Pump Type | Variable Displacement Piston
| Breakout Force | 26512.5kg
| Cooling System | 53L
| Crankcase | 37.1L
| Def Tank | 20.9L
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
| Rops/Fops | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
| Bucket Range | 4.6-12.0 m (6.0-15.75 yd)
| Bore | 130.1mm
| Stroke | 157mm
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in sec
|
---|
|