Содержание
Кабина
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Габаритные размеры
| Bucket Pin Height — Carry Position | 8 in (20 cm) |
| Bucket Pin Height — Maximum Lift | 11 ft (3 m) |
| Bucket Pin Reach — Maximum Lift | 15 in (37 cm) |
| Bumper Overhang — Rear Axle | 43 in (109 cm) |
| Clearance at Max Lift and Dump | 8 ft (2 m) |
| Clearance at Maximum Lift and Dump | 98 in (249 cm) |
| Departure Angle | 26 degrees |
| Ground Clearance | 9 in (22 cm) |
| Height — Top of Cab | 7 ft (2 m) |
| Length — With Bucket on Ground | 151 in (383 cm) |
| Length — Without Bucket | 123 in (312 cm) |
| Length w/o Bucket | 11 ft (3 m) |
| Length with Bucket | 13 ft (4 m) |
| Maximum Dump Angle | 51 degrees |
| Maximum Overall Height | 162 in (411 cm) |
| Maximum Reach — With Arms Parallel | 50 in (127 cm) |
| Rack Back Angle — Maximum Height | 83 degrees |
| Reach — Maximum Lift/Dump | 30 in (76 cm) |
| Reach at Max Lift and Dump | 30 in (76 cm) |
| Turn Radius from Center — Bucket | 89 in (226 cm) |
| Turn Radius from Center — Coupler | 57 in (145 cm) |
| Turn Radius from Center — Rear | 71 in (180 cm) |
| Turning Radius from Center — inc bucket | 102 in (258 cm) |
| Turning Radius from Center — machine rear | 58 in (148 cm) |
| Vehicle Width over Tires | 66 in (168 cm) |
| Wheel Base | 5 ft (1 m) |
| Wheelbase | 5 ft (1 m) |
| Width Over Tires | 6 ft (2 m) |
Двигатель
| Bore | 4 in (9 cm) |
| Displacement | 201 cu in (3,294 cu cm) |
| Engine Make | Caterpillar |
| Engine Model | Cat C3.4 DIT |
| Engine Power — ISO 14396 | 93 hp (69 kw) |
| Gross Power — SAE J1995 | 94 hp (70 kw) |
| Net Flywheel Power | 90 hp (67 kw) |
| Net Power — EEC 80/1269 | 91 hp (68 kw) |
| Net Power — ISO 9249 EEC | 91 hp (68 kw) |
| Net Power — SAE 1349 | 90 hp (67 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2500 rpm |
| Stroke | 5 in (12 cm) |
Гидравлическая система
| Hydraulic Flow (1) | Standard |
| Hydraulic Flow (2) | High Flow XPS |
| Hydraulic Power | 43 hp (32 kw) |
| Loader Hydraulic Flow | 22 gpm (83 lpm) |
| Loader Hydraulic Pressure | 3335 psi |
| Maximum Loader Hydraulic Flow | 33 gpm (125 lpm) |
| Maximum Loader Hydraulic Pressure | 4061 psi |
| Pump Flow Capacity | 22 gpm (83 lpm) |
| Relief Valve Pressure | 3335 psi |
Ковшовый погрузчик
| Breakout Force | 7315 psi |
| Bucket Capacity | 1 cu yd (0 cu m) |
| Operating Load Rating | 3,250 lbs (1,474 kg) |
| Operating Width | 66 in (168 cm) |
| Tipping Angle | 6500 degrees |
Эксплуатационные характеристики
| Alternator Supplied Amperage | 90 amps |
| Breakout Force — Tilt Cylinder | 7,315 lbs (3,318 kg) |
| Chain Box Fluid Capacity — each side | 3 gal (11 l) |
| Cooling System Fluid Capacity | 4 gal (14 l) |
| Engine Oil Fluid Capacity | 3 gal (10 l) |
| Fuel Capacity | 26 gal (98 l) |
| Hydraulic System Fluid Capacity | 15 gal (57 l) |
| Max Speed | 7 mph (12 kph) |
| Operating Voltage | 12 volts |
| Operational Weight | 8,292 lbs (3,761 kg) |
| Rated Operating Capacity | 3,250 lbs (1,474 kg) |
| Rated Operating Capacity with Optional Counterweight | 3,480 lbs (1,579 kg) |
| Tipping Load | 6,500 lbs (2,948 kg) |
Power Train
| Travel Speed Forward | 7 mph (12 kph) |
| Travel Speed Forward — 2-Speed Option | 10 mph (16 kph) |
| Travel Speed Reverse | 7 mph (12 kph) |
| Travel Speed Reverse — 2-Speed Option | 10 mph (16 kph) |
Заправочные объемы техн. жидкостей
| Chain Box — Each Side | 3 gal (11 l) |
| Cooling System | 4 gal (14 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 26 gal (98 l) |
| Hydraulic System | 15 gal (57 l) |
| Hydraulic Tank | 11 gal (42 l) |
Весовые характеристики
| Operating Weight | 8,362 lbs (3,793 kg) |
